ComplEment
Yellow aluminium sheave:
- highly resistant to pulling and shocks
- excellent resistance over time and to chemical agents
- low friction coefficient
- a very high resistance to abrasion
Customised Mini-Éclipse 2
This pulley has been specially designed to be used for small rigging works or in addition to an ÉCLIPSE pulley for rope redirects.
Description
A highly resistant aluminium pulley that is extremely practical thanks to its movable upper axle and rotating cheek plates that permit quick release of the attaching sling and rope. It is locked with a safety linch pin (against unwanted opening) that can’t be lost thanks to its attachment string.
The sides of the cheek plates and the sheave are rounded to prevent damage to ropes during incorrect use. The sheave (Ø 65 mm - 2.55 in) contains a deep groove that can hold up ropes up to Ø 16 mm.
Technical data
| Machinery Directive | 2006/42/CE |
| Weight | 650 g (22.9 oz) |
| MBS | 100 kN - WLL, coef. 5: 20 kN |
| Sheave | Ø 65 mm (1.4 lb) |
| Max. rope Ø | 16 mm (0.6 lb) |
ENGRAVING TECHNICAL DATA
The customisation is on the back of the pulley (the front cheek plate has the regulatory markings).
The zone that can be marked is:
- Mini-Éclipse: 40 mm x 40 mm square
Texts or visual work will have to fit the defined zone and be readable with this size.
Mind that the larger the visual work is, the smaller it will be - to fit in the zone.
For text engraving:
- Simple font (Arial, Impact, Calibri, Verdana, Helvetica etc.) limited to 250 characters maximum.
- Special characters accepted.
For visual work engraving:
- PDF file, preferably vectorised.
- - For non-vectorised files, only PNG with min. 600 ppp resolution (any low quality file will be rejected).
- - BLACK visual work on WHITE background (no shades or gradients).
- - No pictures.
- - No too fine details ( < 0.1 mm that could be difficult to engrave clearly).
- - No engraving out of the zone that has been defined.
- - Subject to approval by FTC.
Download
E-shop
