SRT Ascent


The SRT kit has a foot loop, a neck loop and a storing pouch.


The SRT Footloop is used for work at height, for SRT ascent phases (Single Rope Technique). It connects a harness, a knee ascender and the climber’s foot. This product can be used with all the ascenders on the market.

Warning: This product is no PPE. Only the user is responsible for his uses of the equipment.


The adjustable neck loop helps maintaining the chest ascender upright and in tension for SRT (on a single rope). It is adjustable and elastic, fits easily and perfectly any size. It is easily opened and set up - effortless, and no need to take off the helmet.

The SRT neck loop is sold with its carabiner: no locking system, 80 mm long (3.1 in), 12 kN MBS.

srt BAG

The storage pouch is similar to a chalk bag, but flatter in order to reduce the bulk when it is attached to the harness.

techniCAL DATA

Foot loop

Upper strap length: adjustable from 1 to 1.30 m (3.2 to 4.2 ft)
Lower strap length: adjustable from 0.35 to 0.6 m (13.8 to 23.6 in)

Weight: 135 g (4.8 oz)

Neck loop

Flat elastic band, 25 mm large (1 in)
Breathable inside, for the climber’s comfort
Band made of polyester/cotton

Plastic adjustment buckle to set it to the required length

With carabiner (80 mm long - 3.1 in, 12 kN MBS, no locking system)


Outer bag: Ripstop fabric
Lining: Polyester
Colour: blue outer bag, black lining

Dimensions - 15,5 cm (height - 6.1 in), 13,5 cm (width - 5.3 in), 6 cm (gusset - 2.4 in)
Capacity: 1 L

Drawstring with toggle and end stopper
Reinforced seams

Complementary products