Rigging during a felling job has never been so efficient than with our Mini-Eclipse. Our in-house arborists have designed a lightweight, compact, strong, and easy-to-use tool.
A highly resistant aluminium pulley that is extremely practical thanks to its movable upper axle and rotating cheek plates that permit quick release of the attaching sling and rope. It is locked with a safety linch pin (against unwanted opening) that can’t be lost thanks to its attachment string.
The sides of the cheek plates and the sheave are rounded to prevent damage to ropes during incorrect use. The sheave (Ø 65 mm - 2.55 in) contains a deep groove that can hold up ropes up to Ø 16 mm.
Yellow aluminium sheave:
- highly resistant to pulling and shocks
- excellent resistance over time and to chemical agents
- a very high resistance to abrasion
|Weight||650 g (22.9 oz)|
|MBS||100 kN - WLL, coef. 5: 20 kN|
|Sheave||Ø 65 mm (1.4 lb)|
|Max. rope Ø||16 mm (0.6 lb)|
ZONE THAT CAN BE MARKED
is 40 mm x 40 mm square. Texts or visual work will have to fit the defined zone and be readable with this size. Mind that the larger the visual work is, the smaller it will be - to fit in the zone.
FOR TEXT ENGRAVING
Simple font (Arial, Impact, Calibri, Verdana, Helvetica etc.) limited to 250 characters maximum. Special characters accepted.
FOR VISUAL WORK ENGRAVING
PDF file, preferably vectorised or only PNG with min. 600 ppp resolution. BLACK visual work on WHITE background (no shades or gradients). No pictures. No too fine details (< 0.1 mm that could be difficult to engrave clearly). Subject to approval by FTC TREE.