Big power blockÉclipse 3
Put your creativity to work! Sometimes you need to do just that when preparing large rigging jobs, and now you can customise your Eclipse pulley for those challenges. Our team put their noses to the grindstone so that you can have equipment reflecting the strength and inspiration you exude. And it’s engraved right in our workshop!
It is extremely practical thanks to its movable upper axle and rotating cheek plates that permit quick release of the attaching sling and rope.
It is locked with a safety linch pin (against unwanted opening) that can’t be lost thanks to its attachment string.
The sides of the cheek plates and the sheave are rounded to prevent damage to ropes during incorrect use. The sheave (Ø 90 mm - 3.54 in) contains a deep groove that can hold up ropes up to Ø 18 mm.
Yellow aluminium sheave:
- highly resistant to pulling and shocks
- excellent resistance over time and to chemical agents
- low friction coefficient
- a very high resistance to abrasion
|Weight||1,020 g (2.2 lb)|
|MBS||150 kN - WLL, coef. 5: 30 KN|
|Sheave||Ø 90 mm (3.5 in)|
|Max. rope Ø||18 mm (0.7 in)|
Zone that can be marked:
is 60 mm x 60 mm square. Texts or visual work will have to fit the defined zone and be readable with this size. Mind that the larger the visual work is, the smaller it will be - to fit in the zone.
For text engraving:
Simple font (Arial, Impact, Calibri, Verdana, Helvetica etc.) limited to 250 characters maximum. Special characters accepted.
For visual work engraving:
PDF file, preferably vectorised or only PNG with min. 600 ppp resolution. BLACK visual work on WHITE background (no shades or gradients). No pictures. No too fine details (< 0.1 mm that could be difficult to engrave clearly). Subject to approval by FTC.